Hi all, I would like to know what software version do you currently have on your Arris SB8200. I'm having issues getting speed higher than 600mbps on gigabit plan.
This is what installed on my SB8200. I'm in SF bayarea.
Software Version D31CM-PEREGRINE-1.0.0.2-GA-01-NOSH
↧
Arris SB8200 latest software version from Comcast/xfinity?
↧
SB8200 Upstream power levels
Hi all,
I've recently been having issues with random latency spikes/jitter and occasional packet loss. I'm wondering if my modem signal levels have something to do with this, specifically my upstream levels. Arris' site shows the acceptable range is 45-51 dBmV but mine are a bit lower, see below.
Upstream Bonded Channels
Channel Channel ID Lock Status US Channel Type Frequency Width Power
1 1 Locked SC-QAM Upstream 17300000 Hz 6400000 Hz 40.0 dBmV
2 2 Locked SC-QAM Upstream 23700000 Hz 6400000 Hz 40.0 dBmV
3 3 Locked SC-QAM Upstream 30100000 Hz 6400000 Hz 40.0 dBmV
4 4 Locked SC-QAM Upstream 36500000 Hz 6400000 Hz 40.0 dBmV
5 5 Locked SC-QAM Upstream 41200000 Hz 1600000 Hz 41.0 dBmV
Could this be the cause of the issues I've been experiencing? Any help is appreciated :)
↧
↧
SB8200 hardware version differences ?
So I have a SB8200 with version 4 hardware, I see version 6 is what is shipping now..
Does anyone know what the differences are ?
↧
SB8200 32x8 DOCSIS 3.1 cable modem - Feedback and Results thread
I thought I'd create a new thread for those who end up getting the SB8200 so they can post screenshots (not copy/pasting) and experiences and signal stuff. :)
↧
Motorola MB8611
https://www.go2mhz.com/wp-content/uploads/2020/04/MB8611-DataSheet-MHZ_4-20.pdf
:D
2.5ghz interface. Time to upgrade my router..
↧
↧
Need full dump flash backup for software/firmware corrupted Arris sb8200
I have a software/firmware corrupted Arris sb8200 modem and another fully working one, How can I solderless fully dump Arris sb8200 firmware from working one? The Biggest problem is My Arris sb8200 don't have a serial port connector...Or how can I found full dump nand firmware?
Thank you!
↧
ARRIS S33
 
FYI - Cox has now added the new ARRIS S33 modem, that features a multi-gig 2.5 Gbps LAN port, to their site: https://www.dslreports.com/forum/r32827887-Modem-New-modem-Arris-S33-2-5Gbps-1Gbps-Ethernet-support
Cox Support - Arris S33 https://www.cox.com/residential/support/arris-s33.html
ARRIS S33 Data Sheet: https://www.cox.com/content/dam/cox/residential/support/internet/print_media/ArrisS33_DataSheet.pdf
ARRIS S33 User Guide: https://www.cox.com/content/dam/cox/residential/support/internet/print_media/ArrisS33_%20UserGuide.pdf
↧
SB6190 Puma6 TCP/UDP Network Latency Issue Discussion
I wanted to create a new topic under the ARRIS Forum.. Ok going between the MSO's was getting a little painful saying the same thing..
uid://1552966 reported an ICMP latency issue, ARRIS\Intel has a engineering build that seems to have corrected that issue now lets move onto the UDP/TCP issue..
I am working on recreating what uid://1552966 reported and working with him to get the data together.. I will post when I have have things to say or respond to questions.. Please keep this discussion on topic SB6190 UDP/TCP Network Latency Issue
---- mod edit ----
* Detection tool - http://www.dslreports.com/tools/puma6
* Search dslr hardware section for PUMA 6 chipset: https://www.dslreports.com/testsearch?ndx=Recent&fy=1999&order=score&q=puma6&ty=2016&typ=hardware
* uid://1900355 has a more complete list of devices with the Puma 6 SOC
Here are just a few devices with PUMA 6 chipsets which tend to be associated with gigabit cable modems. Not all of these are confirmed with a problem - it is just likely at this point.
Arris SB6190
Arris TG1672G
Arris TM1602
Super Hub 3 (Arris TG2492LG) (commonly - virgin media)
Hitron CGN3 / CDA / CGNV series modems:
Hitron CDA-32372
Hitron CDE-32372
Hitron CDA3-35
Hitron CGNV4
Hitron CGNM-3552 (commonly - Rogers)
Hitron CGN3 (eg CGN3-ACSMR) 2013 link
Hitron CGNM-2250 (commonly - Shaw)
Linksys CM3024
Linksys CM3016
TP-Link CR7000
Netgear AC1750 C6300 AC1900
Netgear CM700
Telstra Gateway Max (Netgear AC1900 / C6300) (Australia) 2014 link.
Cisco DPC3848V (eg https://www.dslreports.com/forum/r30437563-High-latency-ping-to-Shaw-router )
Cisco DPC3941B / DPC3941T (commonly - Comcast Xfinity XB3)
Cisco DPC3939
Compal CH7465-LG / Arris TG2492LG (commonly - Virgin Media Hub 3)
Samsung "Home Media Server"
----
Potentially more (Puma 6 + MaxLinear SOC):
http://www.zcorum.com/wp-content/uploads/MaxLinear_Intel-Full-Spectrum-Capture-Support.pdf
↧
T25 and puma chipset issues
Does anyone know if the current version of the firmware mitigates the CVE related to DOS attacks? I read before buying that it did but hearing some info that casts doubt that the Puma 7 chipset may still be vulnerable.
Mine currently has version TS11.01.142_061719_701.PC20.03. Any newer versions out there?
↧
↧
3450 / 3452 / 8200s Rebooting When CPE Plugged In
Just wondering if anybody else has seen this issue. e.g. One customer location has two 3452s, both on the same firmware, one has both phone lines in use, the other just one, both on the same profile. The one with the two phone lines in use is rebooting whenever a CPE is plugged in. Doesn't appear to matter what plugs into it, whether it's the router or a laptop for testing.
We have another location where we've tried both a 3450 and 8200, each will reboot when any CPE is plugged in.
At a loss as what could be causing this. It appears to be very random.
↧
Arris SB8200 latest software version from Comcast/xfinity?
Hi all, I would like to know what software version do you currently have on your Arris SB8200. I'm having issues getting speed higher than 600mbps on gigabit plan.
This is what installed on my SB8200. I'm in SF bayarea.
Software Version D31CM-PEREGRINE-1.0.0.2-GA-01-NOSH
↧
sb/cm8200 firmware security certificate
My isp just pushed the AB01.01.009.47_043020_183.0A.NSH firmware to my modem, and now I get a not secure warning on the modem pages. It says there is one certificate on it issued to:
E = kiding@broadcom.com
CN = Daniel
OU = Broadband
O = Broadcom
L = Irvine
S = Califonia
C = UA
anyone else with this firmware get the not secure warning with a certificate issued like this? says it was valid for a month back in 2006
↧
SB8200 hardware version differences ?
So I have a SB8200 with version 4 hardware, I see version 6 is what is shipping now..
Does anyone know what the differences are ?
↧
↧
Arris VIP TV box "management" software?
Hi all...
I have an Arris VIP2262 & 3 VIP2502W TV box from a defunct company that used to service an area that I lived at for a few months.
The company strangely enough did NOT want the equipment back, as I had "purchased" the equipment at the time.
Well, 10 months down the road, and I still have them, and i'm pretty bored out of my mind here at home.
Does ANYONE know if these are essentially paperweights? Or is there a possibility to spring new life into these?
I know they had netflix, plex, pluto tv, amazon prime, youtube & several other apps on top of their somewhat limited providing.
The previous owner of the company would not share any details of how they worked and simply suggested I "toss them out"
Should I "toss them out" or is there a way to spring these to life? I'd like to turn these little things into something cool if possible, especially if I can get netflix and prime working.
Thank you
↧
SB8200 Ping issue and slow upstream speed
Hi,
I've had rock solid connection/speeds for years now. That changed as of this morning, when I noticed large ping spikes and general slowness. Running a speed test showed me that I was only getting about 3/4 Mbps upload as opposed to my normal 15-17 Mbps. Tried rebooting the modem, router, etc. and didn't really change anything.
Connected a laptop directly to the modem and ran a speed test and that gave me almost similar results. I noticed that my upstream Power is pretty high, so I suspect that's the cause.
Downstream Bonded Channels
Channel ID Lock Status Modulation Frequency Power SNR/MER Corrected Uncorrectables
20 Locked QAM256 507000000 Hz -6.2 dBmV 36.9 dB 0 0
17 Locked QAM256 483000000 Hz -5.7 dBmV 41.2 dB 0 0
18 Locked QAM256 489000000 Hz -5.7 dBmV 41.2 dB 0 0
19 Locked QAM256 495000000 Hz -5.7 dBmV 41.0 dB 0 0
21 Locked QAM256 513000000 Hz -6.6 dBmV 39.1 dB 0 0
22 Locked QAM256 519000000 Hz -6.5 dBmV 40.4 dB 0 0
23 Locked QAM256 525000000 Hz -6.3 dBmV 40.6 dB 0 0
24 Locked QAM256 531000000 Hz -5.8 dBmV 40.7 dB 0 0
25 Locked QAM256 543000000 Hz -5.4 dBmV 41.1 dB 0 0
26 Locked QAM256 549000000 Hz -5.2 dBmV 40.9 dB 0 0
27 Locked QAM256 555000000 Hz -4.6 dBmV 41.0 dB 0 0
28 Locked QAM256 561000000 Hz -4.5 dBmV 40.9 dB 0 0
29 Locked QAM256 567000000 Hz -4.5 dBmV 41.1 dB 0 0
30 Locked QAM256 573000000 Hz -3.9 dBmV 41.4 dB 0 0
31 Locked QAM256 579000000 Hz -3.8 dBmV 41.4 dB 0 0
32 Locked QAM256 585000000 Hz -4.0 dBmV 41.5 dB 0 0
33 Locked QAM256 591000000 Hz -4.5 dBmV 41.2 dB 0 0
34 Locked QAM256 597000000 Hz -4.7 dBmV 41.0 dB 0 0
35 Locked QAM256 603000000 Hz -4.9 dBmV 40.7 dB 0 0
36 Locked QAM256 609000000 Hz -4.5 dBmV 41.2 dB 0 0
37 Locked QAM256 615000000 Hz -4.6 dBmV 41.2 dB 0 0
38 Locked QAM256 621000000 Hz -4.3 dBmV 41.4 dB 0 0
39 Locked QAM256 627000000 Hz -4.5 dBmV 41.3 dB 0 0
40 Locked QAM256 633000000 Hz -4.6 dBmV 41.1 dB 0 0
41 Locked QAM256 639000000 Hz -4.9 dBmV 40.9 dB 0 0
42 Locked QAM256 645000000 Hz -4.5 dBmV 41.1 dB 0 0
43 Locked QAM256 651000000 Hz -4.3 dBmV 41.0 dB 0 0
44 Locked QAM256 657000000 Hz -4.0 dBmV 41.0 dB 0 0
45 Locked QAM256 663000000 Hz -4.3 dBmV 41.0 dB 0 0
46 Locked QAM256 669000000 Hz -4.9 dBmV 40.8 dB 0 0
47 Locked QAM256 675000000 Hz -5.6 dBmV 39.5 dB 0 0
48 Locked Other 688000000 Hz -6.1 dBmV 36.5 dB 78791774 0
Upstream Bonded Channels
Channel Channel ID Lock Status US Channel Type Frequency Width Power
1 4 Locked SC-QAM Upstream 36700000 Hz 6400000 Hz 50.0 dBmV
2 1 Locked SC-QAM Upstream 17300000 Hz 6400000 Hz 50.0 dBmV
3 5 Locked SC-QAM Upstream 41200000 Hz 1600000 Hz 52.0 dBmV
4 3 Locked SC-QAM Upstream 30300000 Hz 6400000 Hz 50.0 dBmV
5 2 Locked SC-QAM Upstream 23700000 Hz 6400000 Hz 50.0 dBmV
I would appreciate any help in getting this resolved.
Thank you!
↧
SB8200 32x8 DOCSIS 3.1 cable modem - Feedback and Results thread
I thought I'd create a new thread for those who end up getting the SB8200 so they can post screenshots (not copy/pasting) and experiences and signal stuff. :)
↧
Is there a way to eliminate the BGW210-700 ATT Gateway entirely?
I am nearing 60, so I may just remembering this wrong, however, I thought I remembered reading a post on DSLR that someone was able to totally eliminate the ATT Arris BGW210-700 from their network.
Has anyone else seen that before?
↧
↧
Difference between Arris T25 and TM3402A?
What is the difference in terms of specs? T25 appears to be advertised for Xfinity only but I cannot find TM3402A for retail.
↧
Motorola MB8611
https://www.go2mhz.com/wp-content/uploads/2020/04/MB8611-DataSheet-MHZ_4-20.pdf
:D
2.5ghz interface. Time to upgrade my router..
↧
ARRIS S33
 
FYI - Cox has now added the new ARRIS S33 modem, that features a multi-gig 2.5 Gbps LAN port, to their site: https://www.dslreports.com/forum/r32827887-Modem-New-modem-Arris-S33-2-5Gbps-1Gbps-Ethernet-support
Cox Support - Arris S33 https://www.cox.com/residential/support/arris-s33.html
ARRIS S33 Data Sheet: https://www.cox.com/content/dam/cox/residential/support/internet/print_media/ArrisS33_DataSheet.pdf
ARRIS S33 User Guide: https://www.cox.com/content/dam/cox/residential/support/internet/print_media/ArrisS33_%20UserGuide.pdf
↧